|
ANTON
|
2009-07-01 23:32:05, 조회 : 214, 추천 : 51 |
CSC CARD 자리교체
hw-module slot (N) shutdown
Press RETURN to get started.
R1>
R1>
R1>
R1>
R1>
R1>
R1>en
Password:
R1#sh contr
R1#sh controllers clo
R1#sh controllers clock
Switch Card Configured 0x7E (bitmask), Primary Clock for system is CSC_1
System Fabric Clock is Non Redundant
Switch Card(s) 0x1 (bitmask) are not configured
Slot # Primary Clock Mode
0 CSC_1 Non Redundant
8 CSC_1 Non Redundant
9 None
16 None
17 CSC_1 Non Redundant
18 CSC_1 Non Redundant
19 CSC_1 Non Redundant
20 CSC_1 Non Redundant
21 CSC_1 Non Redundant
22 CSC_1 Non Redundant
R1#sh gsr
Slot 0 type = Modular SPA Interface Card
state = IOS RUN Line Card Enabled
subslot 0/0: SPA-5X1GE (0x44E), status is ok
subslot 0/1: SPA-5X1GE (0x44E), status is ok
subslot 0/2: Empty
subslot 0/3: Empty
Slot 8 type = Performance Route Processor
state = ACTV RP IOS Running ACTIVE
Slot 9 type = Performance Route Processor
state = RP RDY Route Processor Powered
Slot 16 type = Clock Scheduler Card(10) OC-192 Dual Priority
state = Administratively Down, Powered
Slot 17 type = Clock Scheduler Card(10) OC-192 Dual Priority
state = Card Powered PRIMARY CLOCK
Slot 18 type = Switch Fabric Card(10) OC-192-B
state = Card Powered
Slot 19 type = Switch Fabric Card(10) OC-192-B
state = Card Powered
Slot 20 type = Switch Fabric Card(10) OC-192-B
state = Card Powered
Slot 21 type = Switch Fabric Card(10) OC-192-B
state = Card Powered
Slot 22 type = Switch Fabric Card(10) OC-192-B
state = Card Powered
Slot 24 type = Alarm Module(10)
state = Card Powered
Slot 25 type = Alarm Module(10)
state = Card Powered
Slot 29 type = Blower Module(16)
state = Card Powered
R1#conf t
Enter configuration commands, one per line. End with CNTL/Z.
R1(config)#hw
R1(config)#hw-module sl
R1(config)#hw-module slot 9 sh
R1(config)#hw-module slot 9 shutdown
Cannot shutdown an RP
R1(config)#no hw-module slot 9 shutdown
R1(config)#
R1#sh gsr
00:15:25: %SYS-5-CONFIG_I: Configured from console by consgsr
Slot 0 type = Modular SPA Interface Card
state = IOS RUN Line Card Enabled
subslot 0/0: SPA-5X1GE (0x44E), status is ok
subslot 0/1: SPA-5X1GE (0x44E), status is ok
subslot 0/2: Empty
subslot 0/3: Empty
Slot 8 type = Performance Route Processor
state = ACTV RP IOS Running ACTIVE
Slot 9 type = Performance Route Processor
state = RP RDY Route Processor Powered
Slot 16 type = Clock Scheduler Card(10) OC-192 Dual Priority
state = Administratively Down, Powered
Slot 17 type = Clock Scheduler Card(10) OC-192 Dual Priority
state = Card Powered PRIMARY CLOCK
Slot 18 type = Switch Fabric Card(10) OC-192-B
state = Card Powered
Slot 19 type = Switch Fabric Card(10) OC-192-B
state = Card Powered
Slot 20 type = Switch Fabric Card(10) OC-192-B
state = Card Powered
Slot 21 type = Switch Fabric Card(10) OC-192-B
state = Card Powered
Slot 22 type = Switch Fabric Card(10) OC-192-B
state = Card Powered
Slot 24 type = Alarm Module(10)
state = Card Powered
Slot 25 type = Alarm Module(10)
state = Card Powered
Slot 29 type = Blower Module(16)
state = Card Powered
R1#conf t
Enter configuration commands, one per line. End with CNTL/Z.
R1(config)#hw
R1(config)#hw-module sl
R1(config)#hw-module slot 16 ?
shutdown shutdown the selected slot
R1(config)#hw-module slot 16 sh
R1(config)#hw-module slot 16 shutdown
R1(config)#hw-module slot 16 shutdown
00:16:10: %MBUS-6-FABADMINDOWN: Switch card in slot 16 is in ADMIN_DOWN state
R1(config)#hw-module slot 16 shutdown
00:16:13: %MBUS-6-FABADMINDOWN: Switch card in slot 16 is in ADMIN_DOWN state
R1(config)#no
00:16:16: %MBUS-6-FABADMINDOWN: Switch card in slot 16 is in ADMIN_DOWN state
% Incomplete command.
R1(config)#no hw
R1(config)#no hw-module sl
R1(config)#no hw-module slot 16 sh
R1(config)#no hw-module slot 16 shutdown
R1(config)#
00:16:26: %MBUS-6-FABANALYZED: Switch card in slot 16 analyzed
00:16:26: %MBUS-6-FABCONFIG: Switch Cards 0x7F (bitmask)
Primary Clock is CSC_1
Fabric Clock is Redundant
Bandwidth Mode : 10Gbps Bandwidth
R1(config)#
R1#sh cont
R1#sh contr
00:16:32: %SYS-5-CONFIG_I: Configured from console by console
R1#sh controllers clo
R1#sh controllers clock
Switch Card Configured 0x7F (bitmask), Primary Clock for system is CSC_1
System Fabric Clock is Redundant
Slot # Primary Clock Mode
0 CSC_1 Redundant
8 CSC_1 Redundant
9 None
16 CSC_0 Redundant
17 CSC_1 Redundant
18 CSC_1 Redundant
19 CSC_1 Redundant
20 CSC_1 Redundant
21 CSC_1 Redundant
22 CSC_1 Redundant
R1#
00:17:33: %MBUS-6-OIR: Performance Route Processor Removed from Slot 9
00:17:37: %MBUS-6-OIR: Performance Route Processor Inserted into Slot 9
R1#sh controllers clock
Switch Card Configured 0x7F (bitmask), Primary Clock for system is CSC_1
System Fabric Clock is Redundant
Slot # Primary Clock Mode
0 CSC_1 Redundant
8 CSC_1 Redundant
9 None
16 CSC_0 Redundant
17 CSC_1 Redundant
18 CSC_1 Redundant
19 CSC_1 Redundant
20 CSC_1 Redundant
21 CSC_1 Redundant
22 CSC_1 Redundant
R1#sh controllers clock
Switch Card Configured 0x7F (bitmask), Primary Clock for system is CSC_1
System Fabric Clock is Redundant
Slot # Primary Clock Mode
0 CSC_1 Redundant
8 CSC_1 Redundant
9 None
16 CSC_0 Redundant
17 CSC_1 Redundant
18 CSC_1 Redundant
19 CSC_1 Redundant
20 CSC_1 Redundant
21 CSC_1 Redundant
22 CSC_1 Redundant
R1#sh controllers clock
Switch Card Configured 0x7F (bitmask), Primary Clock for system is CSC_1
System Fabric Clock is Redundant
Slot # Primary Clock Mode
0 CSC_1 Redundant
8 CSC_1 Redundant
9 None
16 CSC_0 Redundant
17 CSC_1 Redundant
18 CSC_1 Redundant
19 CSC_1 Redundant
20 CSC_1 Redundant
21 CSC_1 Redundant
22 CSC_1 Redundant
R1#sh gsr
Slot 0 type = Modular SPA Interface Card
state = IOS RUN Line Card Enabled
subslot 0/0: SPA-5X1GE (0x44E), status is ok
subslot 0/1: SPA-5X1GE (0x44E), status is ok
subslot 0/2: Empty
subslot 0/3: Empty
Slot 8 type = Performance Route Processor
state = ACTV RP IOS Running ACTIVE
Slot 9 type = Performance Route Processor
state = RP RDY Route Processor Powered
Slot 16 type = Clock Scheduler Card(10) OC-192 Dual Priority
state = Card Powered
Slot 17 type = Clock Scheduler Card(10) OC-192 Dual Priority
state = Card Powered PRIMARY CLOCK
Slot 18 type = Switch Fabric Card(10) OC-192-B
state = Card Powered
Slot 19 type = Switch Fabric Card(10) OC-192-B
state = Card Powered
Slot 20 type = Switch Fabric Card(10) OC-192-B
state = Card Powered
Slot 21 type = Switch Fabric Card(10) OC-192-B
state = Card Powered
Slot 22 type = Switch Fabric Card(10) OC-192-B
state = Card Powered
Slot 24 type = Alarm Module(10)
state = Card Powered
Slot 25 type = Alarm Module(10)
state = Card Powered
Slot 29 type = Blower Module(16)
state = Card Powered
R1#sh gsr
Slot 0 type = Modular SPA Interface Card
state = IOS RUN Line Card Enabled
subslot 0/0: SPA-5X1GE (0x44E), status is ok
subslot 0/1: SPA-5X1GE (0x44E), status is ok
subslot 0/2: Empty
subslot 0/3: Empty
Slot 8 type = Performance Route Processor
state = ACTV RP IOS Running ACTIVE
Slot 9 type = Performance Route Processor
state = RP RDY Route Processor Powered
Slot 16 type = Clock Scheduler Card(10) OC-192 Dual Priority
state = Card Powered
Slot 17 type = Clock Scheduler Card(10) OC-192 Dual Priority
state = Card Powered PRIMARY CLOCK
Slot 18 type = Switch Fabric Card(10) OC-192-B
state = Card Powered
Slot 19 type = Switch Fabric Card(10) OC-192-B
state = Card Powered
Slot 20 type = Switch Fabric Card(10) OC-192-B
state = Card Powered
Slot 21 type = Switch Fabric Card(10) OC-192-B
state = Card Powered
Slot 22 type = Switch Fabric Card(10) OC-192-B
state = Card Powered
Slot 24 type = Alarm Module(10)
state = Card Powered
Slot 25 type = Alarm Module(10)
state = Card Powered
Slot 29 type = Blower Module(16)
state = Card Powered
R1#sh gsr
Slot 0 type = Modular SPA Interface Card
state = IOS RUN Line Card Enabled
subslot 0/0: SPA-5X1GE (0x44E), status is ok
subslot 0/1: SPA-5X1GE (0x44E), status is ok
subslot 0/2: Empty
subslot 0/3: Empty
Slot 8 type = Performance Route Processor
state = ACTV RP IOS Running ACTIVE
Slot 9 type = Performance Route Processor
state = RP RDY Route Processor Powered
Slot 16 type = Clock Scheduler Card(10) OC-192 Dual Priority
state = Card Powered
Slot 17 type = Clock Scheduler Card(10) OC-192 Dual Priority
state = Card Powered PRIMARY CLOCK
Slot 18 type = Switch Fabric Card(10) OC-192-B
state = Card Powered
Slot 19 type = Switch Fabric Card(10) OC-192-B
state = Card Powered
Slot 20 type = Switch Fabric Card(10) OC-192-B
state = Card Powered
Slot 21 type = Switch Fabric Card(10) OC-192-B
state = Card Powered
Slot 22 type = Switch Fabric Card(10) OC-192-B
state = Card Powered
Slot 24 type = Alarm Module(10)
state = Card Powered
Slot 25 type = Alarm Module(10)
state = Card Powered
Slot 29 type = Blower Module(16)
state = Card Powered
R1#conf t
Enter configuration commands, one per line. End with CNTL/Z.
R1(config)#hw
R1(config)#hw
R1(config)#hw-module [OK]
00:00:03: %MBUS-6-FIA_CONFIG: Switch Cards 0x1F (bit mask); Primary Clock CSC_1
00:00:03: %MBUS-6-RP_STATUS: RP in Slot 9 Mode = MBUS Standby
00:19:50: %RP-6-REDMODE: Operating redundancy mode is SSO
% Incomplete command.
R1(config)#
R1(config)#
R1#
00:19:57: %SYS-5-CONFIG_I: Configured from console by consolesh c
SEC 9:00:00:13: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) GS Software (C12KPRP-K4P-M), Version 12.0(32)SY8, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by cisco Systems, Inc.
Compiled Fri 13-Feb-09 00:18 by lecceseont
R1#sh contr
R1#sh controllers clo
R1#sh controllers clock
Switch Card Configured 0x7F (bitmask), Primary Clock for system is CSC_1
System Fabric Clock is Redundant
Slot # Primary Clock Mode
0 CSC_1 Redundant
8 CSC_1 Redundant
9 CSC_1 Redundant
16 CSC_0 Redundant
17 CSC_1 Redundant
18 CSC_1 Redundant
19 CSC_1 Redundant
20 CSC_1 Redundant
21 CSC_1 Redundant
22 CSC_1 Redundant
R2#sh controllers errors
SCA768 SCA768 SCA768 SCA768 XBAR192 XBAR192 CSCFPGA CSCFPGA CLKFPGA
LC_ENA BP_FRC LC_TYP DE_GNT DAT_LOS SEL_IDL LP_BAK LC_PRE CLKSTS
SLOT0 OK OK OK OK OK OK OK OK OK
SLOT8 OK OK OK OK OK OK OK OK OK
SLOT9 OK OK OK OK OK OK OK OK OK
R2#sh controllers csc-fpga
CSC FPGA Registers:
Slot # 16 (Clock Scheduler Card(10) OC-192 Dual Priority)
Register Value
loopback-tranceivers 0x0000
loopback-control 0x00
reset-select 0x01 sca-control-bus-1
xcvr-type 0x00 hp-1685
interrupt-mask 0x00
FPGA Last Data Echo 0x01
Type/Revision 0016
linecards-present 0x0301 Slots 0 8 9
fabs-present 0x7F CSC0 CSC1 SFC0 SFC1 SFC2 SFC3 SFC4
CSC FPGA Registers:
Slot # 17 (Clock Scheduler Card(10) OC-192 Dual Priority)
Register Value
loopback-tranceivers 0x0000
loopback-control 0x00
reset-select 0x01 sca-control-bus-1
xcvr-type 0x00 hp-1685
interrupt-mask 0x00
FPGA Last Data Echo 0x01
Type/Revision 0016
linecards-present 0x0301 Slots 0 8 9
fabs-present 0x7F CSC0 CSC1 SFC0 SFC1 SFC2 SFC3 SFC4
CSC FPGA Registers:
Slot # 18 (Switch Fabric Card(10) OC-192-B)
Register Value
loopback-tranceivers 0x0000
loopback-control 0x00
reset-select 0x01 sca-control-bus-1
xcvr-type 0x00 hp-1685
interrupt-mask 0x02 mask-sca-interrupt
FPGA Last Data Echo 0x01
Type/Revision 0016
linecards-present 0x0301 Slots 0 8 9
fabs-present 0x7F CSC0 CSC1 SFC0 SFC1 SFC2 SFC3 SFC4
CSC FPGA Registers:
Slot # 19 (Switch Fabric Card(10) OC-192-B)
Register Value
loopback-tranceivers 0x0000
loopback-control 0x00
reset-select 0x01 sca-control-bus-1
xcvr-type 0x00 hp-1685
interrupt-mask 0x02 mask-sca-interrupt
FPGA Last Data Echo 0x01
Type/Revision 0016
linecards-present 0x0301 Slots 0 8 9
fabs-present 0x7F CSC0 CSC1 SFC0 SFC1 SFC2 SFC3 SFC4
CSC FPGA Registers:
Slot # 20 (Switch Fabric Card(10) OC-192-B)
Register Value
loopback-tranceivers 0x0000
loopback-control 0x00
reset-select 0x01 sca-control-bus-1
xcvr-type 0x00 hp-1685
interrupt-mask 0x02 mask-sca-interrupt
FPGA Last Data Echo 0x01
Type/Revision 0016
linecards-present 0x0301 Slots 0 8 9
fabs-present 0x7F CSC0 CSC1 SFC0 SFC1 SFC2 SFC3 SFC4
CSC FPGA Registers:
Slot # 21 (Switch Fabric Card(10) OC-192-B)
Register Value
loopback-tranceivers 0x0000
loopback-control 0x00
reset-select 0x01 sca-control-bus-1
xcvr-type 0x00 hp-1685
interrupt-mask 0x02 mask-sca-interrupt
FPGA Last Data Echo 0x01
Type/Revision 0016
linecards-present 0x0301 Slots 0 8 9
fabs-present 0x7F CSC0 CSC1 SFC0 SFC1 SFC2 SFC3 SFC4
CSC FPGA Registers:
Slot # 22 (Switch Fabric Card(10) OC-192-B)
Register Value
loopback-tranceivers 0x0000
loopback-control 0x00
reset-select 0x01 sca-control-bus-1
xcvr-type 0x00 hp-1685
interrupt-mask 0x02 mask-sca-interrupt
FPGA Last Data Echo 0x01
Type/Revision 0016
linecards-present 0x0301 Slots 0 8 9
fabs-present 0x7F CSC0 CSC1 SFC0 SFC1 SFC2 SFC3 SFC4
R2#conf t
Enter configuration commands, one per line. End with CNTL/Z.
R2(config)#hw
R2(config)#hw-module 17 sh
R2(config)#hw-module sl
R2(config)#hw-module slot 17 sh
R2(config)#hw-module slot 17 shutdown
R2(config)#
05:49:30: %MBUS-6-FABCONFIG: Switch Cards 0x7D (bitmask)
Primary Clock is CSC_0
Fabric Clock is Non Redundant
Bandwidth Mode : 10Gbps Bandwidth
05:49:30: %MBUS-6-FABADMINDOWN: Switch card in slot 17 is in ADMIN_DOWN statehw-module slot 17 shutdown
R2(config)#
05:49:32: %MBUS-6-FABADMINDOWN: Switch card in slot 17 is in ADMIN_DOWN state
R2(config)#no hw-module slot 17 shutdown
R2(config)#
R2#
05:49:46: %MBUS-6-FABANALYZED: Switch card in slot 17 analyzed
05:49:46: %MBUS-6-FABCONFIG: Switch Cards 0x7F (bitmask)
Primary Clock is CSC_0
Fabric Clock is Redundant
Bandwidth Mode : 10Gbps Bandwidthsh
05:49:47: %SYS-5-CONFIG_I: Configured from console by conso
R2#sh clo
R2#sh contr
R2#sh controllers clo
R2#sh controllers clock
Switch Card Configured 0x7F (bitmask), Primary Clock for system is CSC_0
System Fabric Clock is Redundant
Slot # Primary Clock Mode
0 CSC_0 Redundant
8 CSC_0 Redundant
9 CSC_0 Redundant
16 CSC_0 Redundant
17 CSC_0 Redundant
18 CSC_0 Redundant
19 CSC_0 Redundant
20 CSC_0 Redundant
21 CSC_0 Redundant
22 CSC_0 Redundant
R2# |
|
|
